Archive for June, 2018
Common Woodworking Mistakes and How to Fix Them
Workshopshed: Even the best of us make mistakes when woodworking. But rather than scrap the work, it is often possible to make good. Today’s post is by Mark from Tools Critic where he writes about using professional tools. Mark shares
Jumbo Servo Code, Woodwork and Talk
This week saw some more progress on the jumbo servo. Code After looking at some other people’s code, the read register logic was changed slightly. For a read command rather than 3 bytes being sent just a single byte is
Posted in: Jumbo Servo
Wood Putty vs. Wood Filler: What’s the Difference?
When repairing furniture and other wooden items or building them from scratch, there are many instances where you will need to fill holes. These holes can be a result of defects or inconsistencies in the wood or where the nails
A digital servo protocol
For the Jumbo Servo I’ve looking at the I2C protocol. Like all protocols there are layers to this and I’m looking at the top layer which is often call the application layer. One thing that seems to be common with
Posted in: Jumbo Servo
Tags: code, protocols
Jumbo Servo
Over the weekend I’ve made some progress on the jumbo servo. So that I can tell the position of the servo I’ve made a gear to fit on to the pot shaft and connect to the output gear of the
Posted in: Jumbo Servo
Tags: 3d Printing, Electronics
Metal sculpture in brass, mounted on an 1800s French Coin
