A new EBook – A little saw
I’ve been thinking about writing a short book for a while I’d read by Andy Leeks about how he wrote a book on his commute to and from work. I’ve also been writing blog posts on my commute and most
Hacksawing sheet metal
I’m sure you’ve all heard that horrible noise you get when you put a sheet of metal upright in a vice and try to saw through it. The noise is cause by the sheet vibrating as it’s cut. As well
Working with 3mm hardwood plywood
For the Enchanted Cottage project I wanted to add a structure to hide all the mechanics and electronics. Because the weather house was made from 3mm plywood, I thought it made sense to make the rest from the same. The servos also needed testing so to make this easier a simple test rig was made.