M2 Taps and Dies
As mentioned in a previous blog about the arrival of the mini-lathe, my first project is a cutoff disk mandrel for a dremel like drill. For this I needed an M2 tap and die set which arrived in the post
Posted in: Uncategorised
Tags: Cutoff Disk, Dremel, Fadmaker, M2, Mandrel, Metal Work, Mini Drill, Screw Cutting, Taps
Thermalite
Not to be mistaken for thermite which is not a suitable building material!! I was curious to know about these blocks as they are a easy to get hold of in the UK, they are made from recycled material, are
Posted in: Hearth
Tags: Butane, Hanson, Thermalite
Veteran Shed Builder
Not to be out done by Rex my friend Alan has put up another shed, this one is bigger and better than his first and hopefully he did not make the same mistakes as Rex did…Q: Is this your first
Lathe Arrival and Testing
The new/old lathe arrived yesterday and I did a test run of it today to find it’s quirks and nuances. I faced off and turned down a piece of scrap metal recovered from an old rotary washing line and got
Book Review – Tool and Cutter Sharpening
The Tool and Cutter Sharpening book, pretty much covers how to sharpen everything that you might have in your workshop, the only exception I’ve found so far is that the chapter on drills does not mention masonry bits. The book
Posted in: Books and Magazine Reviews, Grinding, Sharpening
Tags: Cutters, Drill bits, Grinder, Quorn, stent, Tools, Vertex, Worden
Stirling Engine Used to Cool PC
Most model engineers will have heard about Stirling Engines, some may have even built a few. However one of the engineers at MSI had good idea of putting a Stirling Engine inside their computer to cool the processor. There’s no
Posted in: Uncategorised
Tags: Cooler, Fan, MSI, Stirling Engine
Shed Builder
I was lucky enough to buy a house with a shed already in place at the bottom of the garden. Other’s have to build their own from scratch or from a kit. My friend Rex and family assembled a “Rowlinson”
Bench work in progress pictures
The bench framework and top assembled, need to attach the edging and sanddown and paint my screw fixing holes. Apart from one joint where the 2 screws clashed in the middle the construction went fine. The shelving that forms the
Posted in: Woodworking, Workshop Furniture
Tags: Workbench
« Previous Page — Next Page »
Metal sculpture in brass, mounted on an 1800s French Coin
