FreeCAD revisited
I am working on a new project to build a small robot and it will have some parts made on the 3D printer. So for that I needed to model those parts in CAD. I did consider getting a Fusion360
Posted in: CAD
Tags: 3d Printing
Jumbo LED
How I made a giant LED, using a 10W chip module, some wire, a bell jar and some 3D printed parts.
Posted in: Jumbo LED
Tags: 3d Printing, CAD
Compass Project
My latest project has just been published in DIYODE Magazine #19. I took the work I had done on the Azure Sphere based IOT Compass and ported it over to the Arduino MKR1000. There was a couple of reasons for
Posted in: IOTCompass
Tags: 3d Printing, compass, magazine
Casting Article
This week I discovered that another of my articles had been published. Model Engineer’s Workshop had published my piece of sand casting using 3D printed patterns and aluminium, for some reason the article does not appear in the table of
Posted in: Techniques
Tags: 3d Printing, casting, Routing, woodwork
Jumbo Servo
Over the weekend I’ve made some progress on the jumbo servo. So that I can tell the position of the servo I’ve made a gear to fit on to the pot shaft and connect to the output gear of the
Posted in: Jumbo Servo
Tags: 3d Printing, Electronics
Knight v2 Completion
The knight project was completed just in time for the October Linuxing in London meetup. Mechanics The 3D model was completed and painted a week or so back. I filled a spare hole in the box lid with a dowel
Posted in: Dragon Detector
Tags: 3d Printing, Electronics, Talk
Interview with designer Agustin Flowalistik
Agustin Flowalistik is a designer with a passion for creating functional things, sharing them and trying to make something good for the planet. His recent creations are the Lampe project a 3D printable light, the Campbell Planter which combines waste
Posted in: Interview
Tags: 3d Printing, low poly
3D Printing a knight
Over the weekend, I printed out the parts for the servo activated knight. It is designed to be glue together but I’ve made the parts a sliding fit. See GitHub for the models. 3D printing the parts There were a
Posted in: Dragon Detector
Tags: 3d Printing
Next Page »
Metal sculpture in brass, mounted on an 1800s French Coin
